添加CaSO4·2H2O为晶种制备磷石膏半水硫酸钙晶须

以固体废弃物磷石膏为原料,在传统常压醇水热法的基础上添加CaSO₄·2H₂O为晶种制备半水硫酸钙晶须。采用单因素试验法探究了晶种含量、丙三醇含量和磷石膏质量分数对晶须结构和形貌的影响,确定晶须的最佳制备工艺条件。采用SEM和XRD对样品进行表征分析,实验结果表明:添加CaSO₄·2H₂O晶种制备晶须的长径比(49.29)比只添加丙三醇的样品的长径比(30.99)提高了近60%;当丙三醇与水的体积比(V)为1、晶种含量为1%、磷石膏质量分数为5%时制备的晶须的平均直径为0.65 μm,长径比达到了62.15,晶须的尺寸均匀。这说明添加1%CaSO₄·2H₂O晶种、V为1的丙三醇和质量分数为5%的磷石膏在常压下能制备出高长径比和尺寸均匀的半水硫酸钙晶须。     

Measurement of the surface excitation parameter of Kapton,polyethylene (PE), polymethyl methacrylate (PMMA), polystyrene (PS) and polytetrafluoroethylene (PTFE)

Reflection electron energy loss spectra (REELS) were measured for five insulating organic compounds: Kapton, polyethylene (PE), poly(methyl methacrylate) (PMMA), polystyrene (PS) and polytetrafluoroethylene (PTFE), as well as for Ni and Si, in the energy range between 200 and 1600 eV. The average number of surface excitations for a single surface crossing were determined from the experimental data and were found to be considerably smaller than for earlier studied materials, which mainly consisted of elemental metals [Surf. Sci. 486(2001)L461]. The surface excitation parameter, a material parameter used to quantify the relative intensity of surface losses in (photo)electron spectroscopy, was extracted from the data and compared with values found in the literature. The results indicate that surface excitations only have a minor influence on quantification of XPS spectra of polymers. On the other hand, a correction for surface excitations turns out to be essential for measurements of the electron inelastic mean free path of polymers when a metal is used as reference material.     

Equilibrium solubility of 6-propyl-2-thiouracil in nine pure solvents: Determination,correlation, Hansen solubility parameter and thermodynamic properties

Investigation upon the solid–liquid equilibrium on solubility data of 6-propyl-2-thiouracil (PLT) in pure organic solvents is essential for separation and purifying in industry process. In this work, PLT solubility in nine neat solvents was experimentally determined at 278.15 K–323.15 K under P = 0.1 MPa. These selected solvents were tetrahydrofuran(THF), acetone, acetonitrile,1-butanol,1-pentanol, 2-butanol, methyl acetate, ethyl acetate,1-propyl acetate, respectively. Experiment results showed that solubility was consistent with temperature and decreased according to the order: THF > acetone>1-butanol≈1-pentanol> 2-butanol > methyl acetate > ethyl acetate>1-propyl acetate > acetonitrile. Solvent effect and Hansen solubility parameter (HSP) were incited to explain dissolution rule on solute. Four thermodynamic models (modi?ed Apelblat model, Van't model, λh model and NRTL model) were adopted to correlate PLT solubility and provide good correlations on basis of RD, ARD and RMSD. In addition, thermodynamic properties (ΔH°, ΔS° and ΔG°) of PLT dissolution process in pure solvents were discussed and proved to be endothermic, entropically driven and non-spontaneous process.     

The Self-Association of the KRAS4b Protein is Altered by Lipid-Bilayer Composition and Electrostatics

KRAS is a peripheral membrane protein that regulates multiple signaling pathways, and is mutated in ≈30 % of cancers. Transient self-association of KRAS is essential for activation of the downstream effector RAF and oncogenicity. The presence of anionic phosphatidylserine (PS) lipids in the membrane was shown to promote KRAS self-assembly, however, the structural mechanisms remain elusive. Here, we employed nanodisc bilayers of defined lipid compositions, and probed the impact of PS concentration on KRAS self-association. Paramagnetic NMR experiments demonstrated the existence of two transient dimer conformations involving alternate electrostatic contacts between R135 and either D153 or E168 on the “α4/5-α4/5” interface, and revealed that lipid composition and salt modulate their dynamic equilibrium. These dimer interfaces were validated by charge-reversal mutants. This plasticity demonstrates how the dynamic KRAS dimerization interface responds to the environment, and likely extends to the assembly of other signaling complexes on the membrane.     

含有五个反馈权值的二维细胞神经网络可实现Mosaic模式

研究一类含有五个反馈权值二维细胞神经网络系统,以系统的输出反馈权值及阈值为参数构成参数空间,引入几何方法,将此空间分解分块成有限个区域,当输出反馈权值及阈值在某一区域上时,给出系统具有M osaic解所有可能的输出函数M osaic模式的充要条件.     

污染数据半参数回归模型中估计的相合性

利用最小二乘估计方法和权函数法给出了半参数模型Y=βX g(T) ε在某种污染方式下,,βg和污染系数的估计,并在适当条件下证明了它们具有相合性.     

甲氧基多溴联苯醚色谱相对保留时间的QSRR研究

基于有机化合物定量结构与色谱相对保留时间的关系,对26个甲氧基多溴联苯醚化合物进行了B3LYP/6-31G*水平上的结构优化,并在优化结构基础上进行了分子连接性指数和量子化学结构参数的提取。应用SPSS统计软件对甲氧基多溴联苯醚化合物的色谱相对保留时间与分子连接性指数进行了多元线性回归(MLR)。结果表明,三阶类分子连接性指数可以很好地表达甲氧基多溴联苯醚化合物色谱相对保留时间与结构描述符之间的定量关系。用外部测试集的方法对模型预测能力进行了验证,结果表明:所建立的QSRR模型具有较强的稳健性和预测能力。     

二种求算晶体平面间距d_(hkl)的数学方法

用数学方法推导出结构化学晶体学中晶面间距的一般通式,并在此基础上推导出其他晶系的晶面间距(d(hkl))的计算表达式。     

Dendronized Hyperbranched Macromolecules: Soft Matter with a Novel Type of Segmental Distribution

Dendronization of a hyperbranched polyester with different generation dendrons leads to pseudo‐dendritic structures. The hyperbranched core is modified by the divergent coupling of protected monomer units to the functional groups. Compared to dendrimers, the synthetic effort is significantly less, but the properties are very close to those of high‐generation dendrimers. The number of functional groups, molar mass, and rheology behavior even in the early generation (G1–G4) pseudo‐dendrimers strongly resembles the behavior of dendrimers in higher generations (G5–G8). Comparison of the segmental and internal structure with perfect dendrimers is performed using SANS, dynamic light scattering and viscosity analysis, microscopy and molecular dynamics simulation. The interpretation of the results reveals unique structural characteristics arising from lower segmental density of the core, which turns into a soft nano‐sphere with a smooth surface even in the first generation.     

Tutorial review on validation of liquid chromatography–mass spectrometry methods: Part I

This is the part I of a tutorial review intending to give an overview of the state of the art of method validation in liquid chromatography mass spectrometry (LC–MS) and discuss specific issues that arise with MS (and MS/MS) detection in LC (as opposed to the “conventional” detectors). The Part I briefly introduces the principles of operation of LC–MS (emphasizing the aspects important from the validation point of view, in particular the ionization process and ionization suppression/enhancement); reviews the main validation guideline documents and discusses in detail the following performance parameters: selectivity/specificity/identity, ruggedness/robustness, limit of detection, limit of quantification, decision limit and detection capability. With every method performance characteristic its essence and terminology are addressed, the current status of treating it is reviewed and recommendations are given, how to determine it, specifically in the case of LC–MS methods.